GUN-2/220 Power Network Two-in-One

Recommended nationwide sales of GUN-2/220 Power and Network Integrated Surge Protector.
The GUN-2/220 Power and Network Integrated Surge Protector effectively prevents equipment damage caused by instantaneous increases in potential differences in power and video lines. It features fast response, high integration, and easy installation. The all-in-one design includes built-in overcurrent and overvoltage protection, achieving the functions of discharging lightning current and resisting lightning electromagnetic pulse impacts. It offers multi-stage protection, low residual voltage, excellent transmission performance, fast response, high current capacity, and a complete range of specifications. Products are available for various working voltage levels and lightning current capacities, and custom production is available for clients.
The GUN-2/220 Power and Network Integrated Surge Protector series monitoring power and network integrated surge protector is installed directly at the front end of the protected equipment (or system). During installation, it should be placed as close as possible to the protected equipment (or system).

2. The surge protector can be fixed to a wall or inside a protective enclosure using screws or a 35mm DIN rail. Signal lines should be connected in series.

3. “IN” connects to the lead-in end, and “OUT” connects to the protected equipment (or system) end. During installation, the wiring at both ends must be laid separately and not bundled together to prevent secondary induction.

4. The surge protector should be grounded using the shortest possible wire.

5. Under normal operating conditions, this surge protector requires no long-term maintenance and only needs routine system maintenance. If signal transmission issues occur during use and normal transmission resumes after replacing the surge protector, it indicates that the surge protector is damaged and requires repair or replacement.